blinking indicator on tach - VetteWeb Forums at Vette Magazine
Facebook

blinking indicator on tach

  
User Name:
Password:
Join FREE Now!
Forgot Password?
Forgot User Name?
Remember Me
Home | Active Posts | Search | Register | Terms | FAQs
Rss
Item Posts    Sort Order

blinking indicator on tach

 
rick s rick s
I watched Corvette Summer | Posts: 15 | Joined: 10/06
Posted: 10/12/06
05:10 PM

I just became the owner of a 1984 corvette today. while driving it home I noticed a small letter D inside a square
in the middle of the tach,just below the colored bar indicator and just above the displayed numerals. What is it and how do I make it stop flashing ? Your help will be greatly appreciated as it is very distracting while driving. Also it is only displayed there when the car is moving.
         Thanks
         Rick S  

 
VETTE Mag VETTE Mag
I watched Corvette Summer | Posts: 24 | Joined: 08/06
Posted: 10/13/06
09:17 AM

Contributor Walt Thurn replies:

It sounds like an indicator light for the overdrive. A D inside an O is for overdrive. The '84 and '85 overdrive indicators were located in the information panel above the radio. The '86 and newer cars had the indicator relocated to under the tach. My best guess is someone installed a newer ('86 up) cluster and it's blinking because it's not getting any signal. This does not hurt anything except to annoy the driver.

Taber Corvette Parts (421 Outer S. State St., Chandler, IN 47610 1-877-349-2838) still repairs/exchanges these clusters for around $300.

Hope this helps,

Walt  

 
rick s rick s
I watched Corvette Summer | Posts: 15 | Joined: 10/06
Posted: 10/23/06
07:18 AM

Walt,thanks for the info I will contact Taber and see if I can get the right cluster  

 
rick s rick s
I watched Corvette Summer | Posts: 15 | Joined: 10/06
Posted: 12/02/06
05:25 PM

Just a quick follow up,you were correct in
your assesment of my problem.My car has wrong cluster,wrong year plus it is for standard transmission car.Went to local shop that specializes in corvette work and they replaced it. part and labor came to $379.00. thanks again for your help